Home > Ntldr Is > How To Fix Ntldr Is Missing Windows Xp Using Usb

How To Fix Ntldr Is Missing Windows Xp Using Usb

Contents

It will boot ti the splash screen, then flash a blue screen, then reboot, then give me a warning saying the hardware had changed and whether to restart Windows in safe I am going to redo everything tonight, format the drives and start over. This is incredibly irritating.Any thoughts, or is this landfill fodder? I will be doing it from the IDE drive first, then the SATA if everything works. Source

I went into BIOS and changed the boot order so it would boot from the CD-ROM drive and it loaded the Windows installer, then quit on me. I can see a blue screen flash real quick during the rebooting. Someone told me that XP sometimes has trouble going onto machines with SATA drives, a driver problem or something and you need to change a BIOS setting to get it to sirstinkyAug 21, 2012, 5:43 AM Well as an update.

How To Fix Ntldr Is Missing Windows Xp Using Usb

Well, on the reboot, it did the usual POST and attempted to boot from the Windows CD, but the POST screen did some weird things before hanging on the "press any Need to get a jumper for it if you don't have one. It had a few bulging capacitors, and I know that's not always the reason a board is glitching, but it seemed like the case here. They are a mix of PATA and SATA interfaces, and so far I've had nothing but trouble with the SATA machines.

  • Powered by phpBB Forum Software © phpBB Group
  • XP SP2.
  • How I did it for the others (except one) is to blow Windows on the IDE drive, load the SATA/storage drivers (and other drivers, chipset, VGA, audio, network, etc.), plug in
  • I'm going to test the RAM today and give it one last shot.
  • The Hard-drive should be set to Master.
  • Then, I tried it again, and the inboard slot threw an error with both sticks.Weird.
  • I tried the SATA drive for the install, and it went just fine up until it came to the part where the setup needed to reboot before proceeding.
  • I thought it was a driver issue so I used my XP boot disk with SATA drivers in it, same deal.
  • I only find Win XP repairs.
  • For yuks, the machine is an Enpower Nitro-08 with an AMD Athlon 64 X2 4000+, generic main board, PC-2 5300 667 MHz RAM 2 GB (I think 184 pin).

Got a bit of a problem. i keep getting ntldr is missing error. Enabled and disabled SATA. Ntldr Is Missing Windows Xp How To Solve This Problem Without Cd At this point I am leaning towards a failing MB...but, I ran the Win.

Bad motherboard?Thanks again! XP install disk, it has a hard time finding the HDD. The power comes on, the CPU and PS fans work, HDD, floppy, and optical drive work, but no video. This machine was working fine with Windows XP pro when I wiped it.

They both have Win 7, one Pro one Premium, but will end up as XP pro's. Ntldr File Location Thoughts? sirstinkyAug 28, 2012, 4:03 AM Thanks for the reply!I tried swapping RAM between slots, and it will work on the second slot with any module I put in it, but it Can you run the system using the other slots?

Ntldr Download For Windows Xp Sp3

So now it's going to be parted out. Thanks! How To Fix Ntldr Is Missing Windows Xp Using Usb sirstinkyAug 17, 2012, 2:18 PM Hello everyone. Tinyempire Ntldr Missing Need to get a jumper for it if you don't have one.

hang-the-9Aug 21, 2012, 10:16 PM Sounds like that ram slot at least is bad. this contact form I tried posting a picture of it on here, but couldn't get it to work. It won't boot from the CD and gave me the same weirdness as before. boot disk as well in case the old one was "damaged" somehow. How To Fix Ntldr Is Missing Windows 7

I took some PC2-4200 sticks from another machine and it was fine in both slots. Usually if you have no jumper it is set to Cable Select but you need both drives to be set to that. Is this a sign of a bad motherboard or RAM? have a peek here IS THERE A REPAIR FOR WINDOWS 7 with the same problem??

Ancient compared to the dead one, but hey, it works! Ntldr File Download Windows Xp Sp2 setup again, and it boots from the CD (good), loads the drivers I slipstreamed (good), but fails to detect the disk 8*(When I run it from the IDE (with the IDE I got a bunch of retired machines from a customer (domain users) and am in the process of wiping them and doing fresh installs of Win.

Thanks! 11 answers Last reply Aug 31, 2012 Best Answer Aug 17, 2012 More about fresh windows install ntldr missing Best answer hang-the-9Aug 17, 2012, 10:33 PM Go to the BIOS

So, I tried using the IDE drive. I set the HDD to primary master and the optical drive to slave, so that should be good, as it worked on my other machine I downgraded to XP. I tried swapping out the SATA drive for a PATA drive with Windows already on it, but that didn't work, did the same thing, loads Windows, then reboots. Bcupdate2.exe Download This is strangeness.

hang-the-9Aug 20, 2012, 11:20 PM If you have both ATA drives on the same cable, need to set them to be either auto detect or manually set to master and slave All Rights Reserved Tom's Hardware Guide ™ Ad choices Return to index page General Error SQL ERROR [ mysqli ]Can't open named pipe to host: . I get the boot menu, but my keyboard doesn't work. http://chatflow.net/ntldr-is/ntldr-is-missing-windows-xp-without-cd.html I tried both the SATA and the IDE disks...same deal.

I tried swapping them between slots, and then something weird happened.One stick threw an error in the first slot (closest to CPU), no POST just a series of long beeps. solved "NTLDR is missing" windows 95 Install on XP computer with NTLDR missing solved Missing ntldr can't boot into windows solved 'NTLDR is missing' Message When Installing SSD Tom's Hardware Around Hang, Thanks for the reply!I have tried changing the jumper settings because I had two IDE drives (the IDE HDD and optical drive) on the same ribbon. If it does, I'll image the IDE drive and blow the image onto the SATA drive and it worked fine.

I don't understand why it's behaving this way. Thanks. Using the new ISO disk, no luck. sirstinkyAug 31, 2012, 4:00 AM Best answer selected by sirstinky.

Is there anything else I can test? This machine HAD Windows XP pro on it when I wiped it, so it must have had the SATA drivers in there. I have done 4 other machines like this, 3 with SATA drives with no problems. Please contact an administrator if this problem persists.

sirstinkyAug 18, 2012, 1:08 PM I tried that today and nothing changed. Same with the boot screen (F12). Fresh install of windows saying that i have missing drivers Installing windows xp and its displaying ntldr missing solved fresh install of windows 7 on a gateway ne56r41u laptop, missing drivers Related Resources Ntldr is missing When trying to install windows xp fresh Fresh install - NTLDR is missing After fresh XP install I get "ntldr is missing" Xp fresh instal ntldr

sirstinkyAug 21, 2012, 3:26 AM hang-the-9 said: If you have both ATA drives on the same cable, need to set them to be either auto detect or manually set to master Weird. Now after all that, I am getting the NTLDR missing warning despite having a good image of an XP machine and a functioning XP boot disk.